There is nothing like homemade bread. Whether banana, pumpkin, white or whole wheat, the smell of a fresh, hot loaf can't be beat.
There are many reasons why you would want to make your own bread. If you have good pumpkin bread recipes or banana bread recipes, you can make a nice dessert or have a quick snack for the kids on hand at all times.
Baking your own white or wheat bread can help you save money on your grocery bill. Eating whole wheat bread will keep you healthier and may even help you lose weight.
You may want to consider supplying your family with homemade wheat bread all the time. The health benefits are many, especially if you are going to use fresh ground wheat. Eating a slice of bread made with fresh ground wheat is like taking a shot of vitamins.
What Is Wheat And Why Would You Want To Use It?
Wheat is the worlds most important grain crop and ranks first among the grains for its nutritional value. When used in its entirety, wheat is an excellent source of fiber and many critical B-vitamins.WheatB-vitamins. Wheat germ is one of the richest sources of vitamin E if used when freshly milled, before oxidation takes place.
The richest source of Vitamin E is found in the germ of the wheat kernel. Milled wheat loses its Vitamin E very quickly due to oxidization. This is the reason why the bread we buy really has nothing of value for us. It has been stripped of the vitamins provided in the wheat. Within about 72 hours of milling, 90% of over 30 nutrients are gone.
Families usually enjoy better health once they start baking bread with fresh ground wheat including significant improvements in sinus conditions, runny noses and colds. There have also been reports of reduced cholesterol counts, warts disappearing, acne clearing and a host of other wonderful benefits. Of course there are the obvious benefits of adding more fiber to your diet, but remember to drink a lot of water when you increase fiber.
2008年3月15日星期六
Try Colon Therapy For Improved Health
Keeping your large intestines healthy is important in maintaining one's overall health. Remember that the large intestines play a vital role in the disposal of waste from the body.
And to keep the intestines healthy, it is important to eat food rich in fiber and phytochemicals. In addition, obesity, smoking and excessive drinking must be avoided.
Aside from these preventive measures, colon therapy is another option in maintaining the health of the intestines. Colon therapy is defined as the method of cleansing and flushing out wastes from the large intestines or colon. The process, also referred to as colonic hydrotherapy and colonic irrigation, is somewhat similar to enema, except that the former flushes out the entire five-foot long long intestine.
During the process, which could last up to an hour, the patient is made to lie on his or her back. The colon therapist will then insert a disposable soft plastic tube into the anus. Body-temperature filtered water is then pumped into the colon which contains enzymes, herbs and other substances for purification. In order to release the fecal matter from the intestines, the abdomen will be massaged. Lastly, the pump is reversed and the fecal matter from the colon is vacuumed into an enclosed waste system. One does not have to deal with any mess or bad odor. An approximate of 20 gallons of water will be used until the end of the session.
Patients say that after undergoing colon therapy, they feel more energized, cleaner and lighter. Others feel dizzy, nauseous and exhibit flu like symptoms, which passed within a few hours.
Colon-cleansing therapies have been practiced for thousands of years. The very first recorded therapies were accredited to Egyptian physicians who came up with devices similar to the ones used in enema today. The French also believed in the importance of cleansing the colons. During the 17th century, it was considered fashionable to have as many as four enemas daily.
However, colon therapy only became very popular during the 19th century when Ilya Ilich Mechnikov, a Russian microbiologist, introduced the idea of autointoxication. He argued that when the colon is filled with hardened stool owing to constipation, poor diet or other gastrointestinal ailments, toxic waste can build up. This waste buildup often leads to stagnation and eventual decay of fecal matter in the colon. While the fecal matter is decaying inside the colon, hosts of bacteria and toxins are produced. When absorbed into the colon lining, these toxins will eventually find their way into the blood stream. This will cause a number of illnesses such as heart diseases etc..
The autointoxication theory was embraced by Dr. John Harvey Kellog. His followers espoused his fitness and health regimens in addition to colonic irrigation. In his article published in the Journal of the American Medical Association in 1917, entitled "Should the Colon Be Sacrificed or May It Be Reformed?", Kellog claimed to have prevented thousands of gastrointestinal surgeries owing to the effectiveness of colon therapy in his sanitarium.
This started the trend in colon therapy in the medical world. In fact, doctors started recommending colon therapy for different ailments such as heart disease, arthritis, depression and high blood pressure.
However, colon therapy was not saved from skepticism and criticism from other doctors. Some believe that there is absolutely no reason to cleanse the colon except in cases of constipation and as preparatory for colonoscopy. According to them, the best way to cleanse the colon is to let its own natural physiological methods to take place.
Modern physicians also point out that waste products are not toxins even though they stay inside the colon for long periods of time. Colon therapy, they added, interferes with the body's natural detoxification process. It outbalances the number of helpful microorganisms which keep the intestines functioning properly. In addition, no scientific studies have been conducted to support the therapeutic claims of colon therapy.
Nevertheless, colon therapy continues to gain wide popularity nowadays, specially among alternative practitioners who utilize colon therapy as an essential part in their detoxification programs. In additions, US companies continue to manufacture new designs and devices in colon therapy.
Despite the two views on colon therapy in the medical world, all sides still agree that avoiding fatty food and red meat, in addition to a healthy and fiber-rich diet, are surefire ways of keeping the colon healthy.
And to keep the intestines healthy, it is important to eat food rich in fiber and phytochemicals. In addition, obesity, smoking and excessive drinking must be avoided.
Aside from these preventive measures, colon therapy is another option in maintaining the health of the intestines. Colon therapy is defined as the method of cleansing and flushing out wastes from the large intestines or colon. The process, also referred to as colonic hydrotherapy and colonic irrigation, is somewhat similar to enema, except that the former flushes out the entire five-foot long long intestine.
During the process, which could last up to an hour, the patient is made to lie on his or her back. The colon therapist will then insert a disposable soft plastic tube into the anus. Body-temperature filtered water is then pumped into the colon which contains enzymes, herbs and other substances for purification. In order to release the fecal matter from the intestines, the abdomen will be massaged. Lastly, the pump is reversed and the fecal matter from the colon is vacuumed into an enclosed waste system. One does not have to deal with any mess or bad odor. An approximate of 20 gallons of water will be used until the end of the session.
Patients say that after undergoing colon therapy, they feel more energized, cleaner and lighter. Others feel dizzy, nauseous and exhibit flu like symptoms, which passed within a few hours.
Colon-cleansing therapies have been practiced for thousands of years. The very first recorded therapies were accredited to Egyptian physicians who came up with devices similar to the ones used in enema today. The French also believed in the importance of cleansing the colons. During the 17th century, it was considered fashionable to have as many as four enemas daily.
However, colon therapy only became very popular during the 19th century when Ilya Ilich Mechnikov, a Russian microbiologist, introduced the idea of autointoxication. He argued that when the colon is filled with hardened stool owing to constipation, poor diet or other gastrointestinal ailments, toxic waste can build up. This waste buildup often leads to stagnation and eventual decay of fecal matter in the colon. While the fecal matter is decaying inside the colon, hosts of bacteria and toxins are produced. When absorbed into the colon lining, these toxins will eventually find their way into the blood stream. This will cause a number of illnesses such as heart diseases etc..
The autointoxication theory was embraced by Dr. John Harvey Kellog. His followers espoused his fitness and health regimens in addition to colonic irrigation. In his article published in the Journal of the American Medical Association in 1917, entitled "Should the Colon Be Sacrificed or May It Be Reformed?", Kellog claimed to have prevented thousands of gastrointestinal surgeries owing to the effectiveness of colon therapy in his sanitarium.
This started the trend in colon therapy in the medical world. In fact, doctors started recommending colon therapy for different ailments such as heart disease, arthritis, depression and high blood pressure.
However, colon therapy was not saved from skepticism and criticism from other doctors. Some believe that there is absolutely no reason to cleanse the colon except in cases of constipation and as preparatory for colonoscopy. According to them, the best way to cleanse the colon is to let its own natural physiological methods to take place.
Modern physicians also point out that waste products are not toxins even though they stay inside the colon for long periods of time. Colon therapy, they added, interferes with the body's natural detoxification process. It outbalances the number of helpful microorganisms which keep the intestines functioning properly. In addition, no scientific studies have been conducted to support the therapeutic claims of colon therapy.
Nevertheless, colon therapy continues to gain wide popularity nowadays, specially among alternative practitioners who utilize colon therapy as an essential part in their detoxification programs. In additions, US companies continue to manufacture new designs and devices in colon therapy.
Despite the two views on colon therapy in the medical world, all sides still agree that avoiding fatty food and red meat, in addition to a healthy and fiber-rich diet, are surefire ways of keeping the colon healthy.
2008年3月5日星期三
Burning Issues for Antacid Drugs
Heartburn, indigestion, and acid reflux are popular ways of describing the pain caused by stomach acid. The burning sensation it produces ranges from discomfort to a searing pain that seems to be burning a hole in your body from back to front. Traditionally, you reach for the cheap antacids based on simple chemicals such as sodium bicarbonate, calcium carbonate and aluminium and magnesium compounds.
But, what if you suffer regularly and frequently? Or if the pain doubles you up, and the simple antacids just do not work for longer than a few minutes?
A trip to your doctor for diagnosis, just to make sure you are not suffering from any serious medical problem is best. I know that acid burning holes in you is serious, but then it is not cancer either. So, you need to know what you have got.
Once it is established that acid is at the source of your pain, the doctor usually prescribes one drug from a two groups of powerful acid fighters. These are the H2 receptor antagonists and the proton pump inhibitors.
Briefly, histamine joins on to special receptors called H2 in the stomach, causing cells to make acid. Molecules that attach to the same receptors but do not cause acid production are called H2 receptor antagonists. The drugs in this group include famotidine (Pepcid), ranitidine (Zantac), cimetidine (Tagamet) and nizatidine (Axid).
The proton pump is the name given to the part of the acid producing process in the stomach where special cells exchange hydrogen ions for potassium ions. The drugs in this group interrupt the process, thus cutting acid production. They include omeprazole (Losec/ Prilosec), esomeprazole (Nexium), lansoprazole (Zoton/ Prevacid), pantoprazole (Protonix) and rabeprazole (Pariet/ Aciphex).
These two groups of drugs have earned billions of dollars in sales and profits for their manufacturers over the years. But, are they as wonderful as the sales figures and advertising would have us believe?
The first thing to say is that they work. Yes, they cut your stomach acid production right down. The relief is great. No pain or discomfort, and life is wonderful once more.
But, take a look at the patient information leaflet you get with the drug. There is a list of possible side effects for you to mull over. The list includes headaches, constipation, diarrhoea and has a note of some of the other medicines that they interact with: things like warfarin for thinning blood, phenytoin for epilepsy, diazepam for anxiety, digoxin for heart problems and antifungal drugs.
Some of these could well be a stumbling block for taking these antacid drugs. More important is the idea that they do not actually solve the problem. Yes, they cut acid but something caused the acid in the first place. And that is what you really need to know about so you can change the cause, not just the symptoms.
More to the point, while you are taking them, your stomach acid is bound to be lower than it should be. You and I need acid in the stomach so we can digest food. And we need acid to protect us from poisoning and infections. The acid kills many bacteria, viruses and fungi we might eat on our food. So, taking the drugs longterm allows some bacteria to cause illnesses we might otherwise not get.
Finally, taking these drugs for extended periods of time can set up changes in the way you keep acid in your stomach. Reduced acid production allows the trap door or sphincter at the stomach entrance to become weak and inefficient. This lets acid leak up into your oesophagus and cause damage there.
So, it is a dilemma. Let people suffer from too much acid or dose them up with drugs that could cause serious changes and problems later on. There is no simple answer. The ideal situation is to find the source of the problem and sort it. Perhaps you would be better using the drugs to give you time to investigate and sort the cause before it is too late.
But, what if you suffer regularly and frequently? Or if the pain doubles you up, and the simple antacids just do not work for longer than a few minutes?
A trip to your doctor for diagnosis, just to make sure you are not suffering from any serious medical problem is best. I know that acid burning holes in you is serious, but then it is not cancer either. So, you need to know what you have got.
Once it is established that acid is at the source of your pain, the doctor usually prescribes one drug from a two groups of powerful acid fighters. These are the H2 receptor antagonists and the proton pump inhibitors.
Briefly, histamine joins on to special receptors called H2 in the stomach, causing cells to make acid. Molecules that attach to the same receptors but do not cause acid production are called H2 receptor antagonists. The drugs in this group include famotidine (Pepcid), ranitidine (Zantac), cimetidine (Tagamet) and nizatidine (Axid).
The proton pump is the name given to the part of the acid producing process in the stomach where special cells exchange hydrogen ions for potassium ions. The drugs in this group interrupt the process, thus cutting acid production. They include omeprazole (Losec/ Prilosec), esomeprazole (Nexium), lansoprazole (Zoton/ Prevacid), pantoprazole (Protonix) and rabeprazole (Pariet/ Aciphex).
These two groups of drugs have earned billions of dollars in sales and profits for their manufacturers over the years. But, are they as wonderful as the sales figures and advertising would have us believe?
The first thing to say is that they work. Yes, they cut your stomach acid production right down. The relief is great. No pain or discomfort, and life is wonderful once more.
But, take a look at the patient information leaflet you get with the drug. There is a list of possible side effects for you to mull over. The list includes headaches, constipation, diarrhoea and has a note of some of the other medicines that they interact with: things like warfarin for thinning blood, phenytoin for epilepsy, diazepam for anxiety, digoxin for heart problems and antifungal drugs.
Some of these could well be a stumbling block for taking these antacid drugs. More important is the idea that they do not actually solve the problem. Yes, they cut acid but something caused the acid in the first place. And that is what you really need to know about so you can change the cause, not just the symptoms.
More to the point, while you are taking them, your stomach acid is bound to be lower than it should be. You and I need acid in the stomach so we can digest food. And we need acid to protect us from poisoning and infections. The acid kills many bacteria, viruses and fungi we might eat on our food. So, taking the drugs longterm allows some bacteria to cause illnesses we might otherwise not get.
Finally, taking these drugs for extended periods of time can set up changes in the way you keep acid in your stomach. Reduced acid production allows the trap door or sphincter at the stomach entrance to become weak and inefficient. This lets acid leak up into your oesophagus and cause damage there.
So, it is a dilemma. Let people suffer from too much acid or dose them up with drugs that could cause serious changes and problems later on. There is no simple answer. The ideal situation is to find the source of the problem and sort it. Perhaps you would be better using the drugs to give you time to investigate and sort the cause before it is too late.
Supplements for Prostate Health: How Effective Are They?
Prostate disorders have become quite common among 21st century men. The number of diagnosed cases has escalated alarmingly, particularly in Western countries. With the increasing number of reported cases, researchers and scientists have developed various sets of treatment protocols to help manage conditions affecting the prostate gland. However, maintaining a healthy prostate is still the best way to avoid having to undergo strenuous treatment tactics to manage these problems. In the past few years, supplements for prostate health have been made available to help men minimize their chances of developing any of these disorders.
Supplements for prostate health are not cures, they are habits and nutrients that can help improve a man's prostate health and thereby narrow his chances of acquiring prostate-related disorders such as prostatitis, enlarged prostate and even cancer. According to studies, nutrition is the most important factor both in the development and management of prostate gland diseases. Proper diet and a healthy lifestyle are believed to be key elements in maintaining a healthy prostate.
The prostate gland is part of the male reproductive system. It is located under the urinary bladder and in front of the rectum. The position of the prostate allows it to affect the processes of urination and ejaculation. To maintain the health of the prostate gland, experts have claimed that excessive intake of animal-derived foods such as red meat and dairy products should be avoided. This claim is primarily based on statistics which showed that Western men have a higher percentage of prostate diseases compared with Asian men. Westerners are more inclined to have red meat in their diet, while Asians are more likely to eat vegetables and fruits.
Another factor that contributes to prostate health is lycopene. Lycopene is an antioxidant agent that can be found in tomatoes, guavas, watermelon and pink grapefruit. When it comes to minerals, zinc has been hailed as the most effective in helping lower a man's chances of developing prostate disorders. Zinc can be found in shellfish, yeast and pumpkin seeds. Since men tend to lose zinc when they ejaculate, their need for this particular mineral is higher than that of women. A daily intake of 50 to 100 milligrams of zinc has been recommended by health experts to ensure a proper level of supply in the body.
Soy products are another of those groups of foods recommended to men, particularly those aged 45 and above. Some scientists have speculated that Japanese men have lower incidence of prostate cancer compared with American men because they have higher intakes of soy foods. Tofu, tempeh, miso and soy milk are common in most Japanese men's dietary programs. Aside from their long-proven nutritional functions, soy products also contain two substances that seem to help fight cancer. These are genistein and isoflavinoids. These chemicals have been found to be particularly effective against hormone-dependent cancers like prostate cancer.
Most supplements for prostate health are found in ordinary natural foods that people can easily get their hands on. Even though these supplements cannot cure cancer, they can help in developing the defenses of men against prostate disorders.
Supplements for prostate health are not cures, they are habits and nutrients that can help improve a man's prostate health and thereby narrow his chances of acquiring prostate-related disorders such as prostatitis, enlarged prostate and even cancer. According to studies, nutrition is the most important factor both in the development and management of prostate gland diseases. Proper diet and a healthy lifestyle are believed to be key elements in maintaining a healthy prostate.
The prostate gland is part of the male reproductive system. It is located under the urinary bladder and in front of the rectum. The position of the prostate allows it to affect the processes of urination and ejaculation. To maintain the health of the prostate gland, experts have claimed that excessive intake of animal-derived foods such as red meat and dairy products should be avoided. This claim is primarily based on statistics which showed that Western men have a higher percentage of prostate diseases compared with Asian men. Westerners are more inclined to have red meat in their diet, while Asians are more likely to eat vegetables and fruits.
Another factor that contributes to prostate health is lycopene. Lycopene is an antioxidant agent that can be found in tomatoes, guavas, watermelon and pink grapefruit. When it comes to minerals, zinc has been hailed as the most effective in helping lower a man's chances of developing prostate disorders. Zinc can be found in shellfish, yeast and pumpkin seeds. Since men tend to lose zinc when they ejaculate, their need for this particular mineral is higher than that of women. A daily intake of 50 to 100 milligrams of zinc has been recommended by health experts to ensure a proper level of supply in the body.
Soy products are another of those groups of foods recommended to men, particularly those aged 45 and above. Some scientists have speculated that Japanese men have lower incidence of prostate cancer compared with American men because they have higher intakes of soy foods. Tofu, tempeh, miso and soy milk are common in most Japanese men's dietary programs. Aside from their long-proven nutritional functions, soy products also contain two substances that seem to help fight cancer. These are genistein and isoflavinoids. These chemicals have been found to be particularly effective against hormone-dependent cancers like prostate cancer.
Most supplements for prostate health are found in ordinary natural foods that people can easily get their hands on. Even though these supplements cannot cure cancer, they can help in developing the defenses of men against prostate disorders.
Construction Equipments - We Cannot Live Without It
We would have been still constructing the Panama Canal but for the modern gigantic construction equipments. These Herculean machines made life easy for us by their enormous strengths and capacities for long drawn heavy duties under all torturous conditions.
To think that these engineering marvels work for reclaiming lands from bays, striking piles into the hard sea beds or drilling tunnels deep below the sea beds (Trans European Tunnel connecting England to France), is mind boggling. The list can go endless but for the scope of this article which is limited.
Equipments to Suit All Needs
Construction equipments may be classified as per needs and further by capacities.
1.Excavating and Earth moving: These gigantic machines are hydraulically operated to safeguard from shock failures. These are the first machines to be employed for preparing the construction sites. Land leveling by digging and cutting terrains are done by excavators of appropriate capacities which run into 1000s of HP. Basic earth movers include dozers, tippers and loaders.
2.Concrete processors: Batch or continuous concrete mixers are computer programmed for consistent precise mix. These are stationed permanently near the site or in the factory depending on convenience. Small batch mixers of less than one quintal capacities are portable. The concrete is transported from far off plants in transit mixers of minimum capacity 6 cubic meters by volume. Concrete is poured to the spot using concrete pumps.
3.Bar bending machines: Small high torque generating bar bending machines are handy in bending and forming construction steel bars. These are available in various specifications.
4.Rollers and compactors: Rollers are employed to compact the ground after dozers have leveled it. Some rollers are also equipped with vibrating compactors eliminating the need for separate compacting. For small areas like indoors vibrating plate compactors, which generate up to 1000kgf maybe used.
These are just about the equipments fundamentally required for construction of homes and offices.
Road Construction
For road construction, depending on whether the road is being asphalted or concretized, the equipments change. Asphalt mixers and asphalt pavers take-up the job of road laying to perfection. Concrete road pavers, although work on similar principle, can't finish the road-laying as concrete needs setting time.
There is a need for faster laying technique. Road surface finishing is by a technique called VDF, which stands for vacuum dewatered flooring. Smoother finishes are given by power trowels and anti skid finishes by brooms, mechanized or manual. Roads such as speedway lanes would benefit greatly from this technique. Now shouldn't we pay tribute to these kind machines?
To think that these engineering marvels work for reclaiming lands from bays, striking piles into the hard sea beds or drilling tunnels deep below the sea beds (Trans European Tunnel connecting England to France), is mind boggling. The list can go endless but for the scope of this article which is limited.
Equipments to Suit All Needs
Construction equipments may be classified as per needs and further by capacities.
1.Excavating and Earth moving: These gigantic machines are hydraulically operated to safeguard from shock failures. These are the first machines to be employed for preparing the construction sites. Land leveling by digging and cutting terrains are done by excavators of appropriate capacities which run into 1000s of HP. Basic earth movers include dozers, tippers and loaders.
2.Concrete processors: Batch or continuous concrete mixers are computer programmed for consistent precise mix. These are stationed permanently near the site or in the factory depending on convenience. Small batch mixers of less than one quintal capacities are portable. The concrete is transported from far off plants in transit mixers of minimum capacity 6 cubic meters by volume. Concrete is poured to the spot using concrete pumps.
3.Bar bending machines: Small high torque generating bar bending machines are handy in bending and forming construction steel bars. These are available in various specifications.
4.Rollers and compactors: Rollers are employed to compact the ground after dozers have leveled it. Some rollers are also equipped with vibrating compactors eliminating the need for separate compacting. For small areas like indoors vibrating plate compactors, which generate up to 1000kgf maybe used.
These are just about the equipments fundamentally required for construction of homes and offices.
Road Construction
For road construction, depending on whether the road is being asphalted or concretized, the equipments change. Asphalt mixers and asphalt pavers take-up the job of road laying to perfection. Concrete road pavers, although work on similar principle, can't finish the road-laying as concrete needs setting time.
There is a need for faster laying technique. Road surface finishing is by a technique called VDF, which stands for vacuum dewatered flooring. Smoother finishes are given by power trowels and anti skid finishes by brooms, mechanized or manual. Roads such as speedway lanes would benefit greatly from this technique. Now shouldn't we pay tribute to these kind machines?
2008年1月5日星期六
Reducing Energy Costs with Brazed Plate Heat Exchangers
Finding ways to reduce energy is always a smart way to cut costs, but with the current cost of consumption, conserving energy can make a big impact on the bottom line. With improved technology of heat exchangers, dramatic energy savings are now possible when brazed plate heat exchangers are used in various applications.
What are brazed plate heat exchangers?
Brazed plate heat exchangers aren't a brand of heat exchangers, but a style. The two most common types are tube and shell, and plate and frame. The shell and tube heat exchanger design consists of u-shaped heating elements encased in a cylindrical tube. On the other hand, plate and frame heat exchangers are a "sandwich" of heat conducting plates through which independent circuits push fluids. Brazed plate heat exchangers are a type of plate and frame heat exchanger that is brazed in a vacuum furnace to reduce leaks.
How They Work:
Brazing is the process of melting layers of metals which are used to fuse together close fitting plates, thus creating a sandwich of different layers. Once the bonding metal cools, the result is an unusually strong component engineered for heat transfer. A brazed plate heat exchanger works by conducting unwanted heat through numerous layers of metal encased in a vacuum furnace and releasing the heat into a permissible area.
Heat Exchangers Mean Lower Energy Use:
Perhaps the greatest benefit of the exchanger is its small size and relatively low energy usage. For its size, this type of plate heat exchanger has a lot of muscle. The difference with plate and frame heat exchangers is that liquids actually make contact with the heat conductor unlike with a shell and tube design where liquids can only make contact with the outer shell. In the past, brazed plate heat exchangers were used for refrigeration units up to 80 tons, but today can be used for units up to 160 tons.
Lower Energy Usage; a Powerful Selling Point:
In a highly competitive market, reduced energy usage is a big selling point for end users. If the functionality of a product is similar to the competition, benefits like energy usage win customers. The benefit of reduced usage cost over time allows manufacturers to charge a higher premium while saving the customer money in the long run.
Benefits:
Brazed plate heat exchangers have a reputation for reliability which reduces the overall cost of maintenance and repair even further. The very process of the fluid turbulence over the metals has a natural self cleaning effect that eliminates damage due to build up. Additionally, they are between 50% and 80% smaller than other varieties of heat exchangers. Because of their compact nature, these heat exchangers are not only energy efficient and cost effective, but also adaptable for a variety of different uses.
Uses:
These exchangers are commonly used for refrigeration units, but also ideal for heat pumps, floor heaters, domestic water heaters, swimming pool heating, snow melting appliances, and any type of fluid to fluid heating unit. There are also plenty of industrial uses for brazed heat exchangers such as in hydraulic oil coolers, transmission and engine coolers, and in marine and seawater applications.
The ton capacity of heat exchangers varies from manufacturer to manufacturer. Be sure to compare the specifications of various terms of productivity and performance. In today's market, production of goods with high productivity and low cost of ownership is more crucial than ever and engineering products around brazed heat plate exchangers is a step toward meeting that goal.
What are brazed plate heat exchangers?
Brazed plate heat exchangers aren't a brand of heat exchangers, but a style. The two most common types are tube and shell, and plate and frame. The shell and tube heat exchanger design consists of u-shaped heating elements encased in a cylindrical tube. On the other hand, plate and frame heat exchangers are a "sandwich" of heat conducting plates through which independent circuits push fluids. Brazed plate heat exchangers are a type of plate and frame heat exchanger that is brazed in a vacuum furnace to reduce leaks.
How They Work:
Brazing is the process of melting layers of metals which are used to fuse together close fitting plates, thus creating a sandwich of different layers. Once the bonding metal cools, the result is an unusually strong component engineered for heat transfer. A brazed plate heat exchanger works by conducting unwanted heat through numerous layers of metal encased in a vacuum furnace and releasing the heat into a permissible area.
Heat Exchangers Mean Lower Energy Use:
Perhaps the greatest benefit of the exchanger is its small size and relatively low energy usage. For its size, this type of plate heat exchanger has a lot of muscle. The difference with plate and frame heat exchangers is that liquids actually make contact with the heat conductor unlike with a shell and tube design where liquids can only make contact with the outer shell. In the past, brazed plate heat exchangers were used for refrigeration units up to 80 tons, but today can be used for units up to 160 tons.
Lower Energy Usage; a Powerful Selling Point:
In a highly competitive market, reduced energy usage is a big selling point for end users. If the functionality of a product is similar to the competition, benefits like energy usage win customers. The benefit of reduced usage cost over time allows manufacturers to charge a higher premium while saving the customer money in the long run.
Benefits:
Brazed plate heat exchangers have a reputation for reliability which reduces the overall cost of maintenance and repair even further. The very process of the fluid turbulence over the metals has a natural self cleaning effect that eliminates damage due to build up. Additionally, they are between 50% and 80% smaller than other varieties of heat exchangers. Because of their compact nature, these heat exchangers are not only energy efficient and cost effective, but also adaptable for a variety of different uses.
Uses:
These exchangers are commonly used for refrigeration units, but also ideal for heat pumps, floor heaters, domestic water heaters, swimming pool heating, snow melting appliances, and any type of fluid to fluid heating unit. There are also plenty of industrial uses for brazed heat exchangers such as in hydraulic oil coolers, transmission and engine coolers, and in marine and seawater applications.
The ton capacity of heat exchangers varies from manufacturer to manufacturer. Be sure to compare the specifications of various terms of productivity and performance. In today's market, production of goods with high productivity and low cost of ownership is more crucial than ever and engineering products around brazed heat plate exchangers is a step toward meeting that goal.
2008年1月4日星期五
Internet Marketing : How to Turbo-Boost Your Online Sales to New Heights
Not happy with the amount of online sales you are making? In this simple Internet marketing strategy guide, I will show you 10 boundless ways to turbo-boost your sales to new heights.
1. Trigger your prospect's emotions in your ads
In order to inspire your prospects to buy from you, you need to trigger some form of emotion inside their minds in your sales copies. A line such as "Make more money online" will do nothing to arouse any form of excitement in your prospects.
But try something like "Get ready to fire your boss!" and you will get the adrenaline pumping through the veins of your audience.
2. Ensure that your product solves a problem
More often than not, people go on the Internet looking for information to solve a certain problem. So make sure that you not only highlight a problem to your prospects, but you also magnify the size of it, and then go on and show how your product can solve the problem. The general rule is this : the bigger the problem, the more sales you will make.
3. Use your online profits wisely
I know that you will get very excited when you see profits come pouring into your online business. But please keep your excitement to a minimum. You need to constantly re-invest some of your profits back into your business to bring in even more sales. Spend it wisely on various types of online marketing, improve your product, customer service etc.
4. Get your prospects to think
One of the ways to catch your prospects' attention is to ask questions that will force them to do some thinking. Make them think about their current situation or problems. For example, you can ask something like :" Are you sick and tired of your dead end job? How would you like to break free from your terrible and unreasonable boss?"
5. Create a resource center
Revamp your website to turn it into a targeted resource center. You would need to do some research on this. Once you settled on a particular subject, the next step is to build on it. Gather all the free resources you can find on the Internet, like free e-books, free e-courses, free software, etc and add them into your resource center. This Internet marketing strategy will help you grow the number of repeat customers who are interested in that particular topic in your resource center.
6. Offer genuine free stuff
When you promise to offer something free to your customers, make sure that you are true to your word. If your visitors go to your site because you tell them that you are offering some free software, but found out that they actually need to pay a small fee, then they will really hate you for that. They will lose their trust in you, and will not buy from you. Forever.
7. Create an online forum or message board
Your visitors would want to interact with other people who share the same interests and passion about a particular topic. So in order not to disappoint them, you can create an online forum or message board so that your customers will come back to your site regularly to interact freely with one another.
8. Entice other people to link to your site
Link popularity is the way to go if you want a decent ranking in the major search engines, so entice other people to link back to your site. You would want to offer something free in exchange for their favor.
9. Ensure your website is compatible with all browsers
Make sure that your website looks good in all browsers, because you could be losing some valuable customers if your site looks distorted and gibberish in some web browsers.
10. E-mail solo ads to your subscriber base
Solo email ads are widely accepted as one of the most effective form of online advertising. So if you own an e-zine, then you can email full page solo ads on your offers periodically e.g once or twice a month to your subscribers. But please remember to inform them that they will receive email ads before they subscribe, because if you fail to do that, they may take it as you are spamming them.
1. Trigger your prospect's emotions in your ads
In order to inspire your prospects to buy from you, you need to trigger some form of emotion inside their minds in your sales copies. A line such as "Make more money online" will do nothing to arouse any form of excitement in your prospects.
But try something like "Get ready to fire your boss!" and you will get the adrenaline pumping through the veins of your audience.
2. Ensure that your product solves a problem
More often than not, people go on the Internet looking for information to solve a certain problem. So make sure that you not only highlight a problem to your prospects, but you also magnify the size of it, and then go on and show how your product can solve the problem. The general rule is this : the bigger the problem, the more sales you will make.
3. Use your online profits wisely
I know that you will get very excited when you see profits come pouring into your online business. But please keep your excitement to a minimum. You need to constantly re-invest some of your profits back into your business to bring in even more sales. Spend it wisely on various types of online marketing, improve your product, customer service etc.
4. Get your prospects to think
One of the ways to catch your prospects' attention is to ask questions that will force them to do some thinking. Make them think about their current situation or problems. For example, you can ask something like :" Are you sick and tired of your dead end job? How would you like to break free from your terrible and unreasonable boss?"
5. Create a resource center
Revamp your website to turn it into a targeted resource center. You would need to do some research on this. Once you settled on a particular subject, the next step is to build on it. Gather all the free resources you can find on the Internet, like free e-books, free e-courses, free software, etc and add them into your resource center. This Internet marketing strategy will help you grow the number of repeat customers who are interested in that particular topic in your resource center.
6. Offer genuine free stuff
When you promise to offer something free to your customers, make sure that you are true to your word. If your visitors go to your site because you tell them that you are offering some free software, but found out that they actually need to pay a small fee, then they will really hate you for that. They will lose their trust in you, and will not buy from you. Forever.
7. Create an online forum or message board
Your visitors would want to interact with other people who share the same interests and passion about a particular topic. So in order not to disappoint them, you can create an online forum or message board so that your customers will come back to your site regularly to interact freely with one another.
8. Entice other people to link to your site
Link popularity is the way to go if you want a decent ranking in the major search engines, so entice other people to link back to your site. You would want to offer something free in exchange for their favor.
9. Ensure your website is compatible with all browsers
Make sure that your website looks good in all browsers, because you could be losing some valuable customers if your site looks distorted and gibberish in some web browsers.
10. E-mail solo ads to your subscriber base
Solo email ads are widely accepted as one of the most effective form of online advertising. So if you own an e-zine, then you can email full page solo ads on your offers periodically e.g once or twice a month to your subscribers. But please remember to inform them that they will receive email ads before they subscribe, because if you fail to do that, they may take it as you are spamming them.
订阅：
博文 (Atom)
